How do i perform the 2015 Acura ILX tpms reset?

eyeOutline 1145 messagesOutline 2
star Top Answer
accountCircle
Robert H. January 4, 2021
To reset the TPMS light in a 2015 Acura ILX You will need to inflate the tires to the recommended settings. The tire pressure monitoring system monitors the sensors inside of the wheels and will alert the driver when the pressures fall a few pounds below the recommended tire PSI setting. You can scroll through the driver information display to have it show the tire pressures and it will tell You which one is causing the fault. Once You inflate the low tire to between 32 to 33 PSI the TPMS light should go out, or You may have to drive for a few minutes above 15 mph. Properly inflated tires are not only important for safety purposes, but also helps maintain the fuel economy and helps reduce uneven and excessive tire wear.
accountCircle
Virginia T July 16, 2020
To reset the tire pressure monitor in the 2015 acura ilx, hold down the tpms button, which is likely below the steering wheel. After the corresponding light blinks three times, release the button. Immediately start the vehicle and let it run for 20 minutes.
Leave your answer
Name
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.