To perform an oil light reset on the 2019 Lincoln Navigator is easy and takes a few minutes. What you're going to want to do first is turn the key in the ignition to the ON position. Then, press the SETUP button until you get to OIL LIFE. Now, hold onto the RESET button until you see it reset to 100%. You can now turn the engine off. Your oil life should now be completely reset. If you want to check the process was successful, go ahead and turn the ignition on again and check if the light is off. That's all you need to do.
Put the car in run position. Does that mean turn the car on or does that mean but the car and drive what is run position
Richard H.
April 10, 2020
To reset the oil light on a 2019 lincoln navigator put the car in the run position, press setup, then hold reset for 2 seconds till oil life is at 100%.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.