How do I reset the oil light in the 2010 Toyota Prius ?

eyeOutline 13273 messagesOutline 4
star Top Answer
To reset the oil maintenance light in the 2010 Toyota Prius, locate the "trip" button on the right hand of the steering wheel. Depress it until the driver's information center flashes "trip A". Press the engine's power button "off". On the driver's dash depress the "km/mph" and hold down, while powering on the vehicle. The DIC will begin to re-calibrate the oil life and display "re-settings complete". Schedule oil and filter changes for the Prius every 12 months or 10,000 miles, using full synthetic products. Use Toyota branded lubricants or a 0W-20 replacement to ensure viscosity standards. Thinner oils coat engine parts, reduce friction and improve fuel economy better in colder months. The cost for a Prius lubricant service averages between $115-$130 in materials and labor.
accountCircle
Robert S. April 9, 2020
To reset the oil light on a 2010 toyota prius, set the ignition to on, press the trip button, then turn the ignition off. Without holding the brake down, and while pressing the km/mph button, press the start button. Keep holding the km/mph button until you see the message on your onboard display that the reset is complete.
accountCircle
Crystal E. April 9, 2020
Turn the ignition "off" to reset the oil light by pressing the start button without touching the brake and holding the mph km / h button. Keep holding the mph km / h button while the reset is going on and until the reset is complete.
accountCircle
Jim January 11, 2022
With engine powered on, set trip meter to trip A. Now power system off. Now, while holding MPH button down, power system on as normal while touching brake. Display will come up showing it is resetting meter. Done. Release MPH button
Leave your answer
Name
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.