How to add coolant to jeep wrangler?

It's very easy to add coolant to the Jeep Wrangler, it will only take a couple minutes. The first thing You do is pop the hood, external hood latches then slide the center hood latch lock to the right and lift the hood up and set the prop rod in the proper position. Find the coolant reserve tank, it is in the front of the engine compartment, just to the left of the upper radiator hose. On the left side of the tank, there is indicator marks for the cold fill level and the hot fill level. Lift the yellow cap to expose the tank opening. At the Wrangler had just been driven recently use the hot fill line mark and if it has been sitting for at least an hour and a half go by the cold fill line. It's best to use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT that meets the requirements of FCA Material Standard MS.90032.