To reset the Honda CR-V after You have changed the battery You will need to follow these quick steps. Turn the radio on using the power button. Let it sit for just a minute. Now turn the radio off using the power button, but do not let go of it. Hold it down for about 30 seconds to a minute. Now turn it back on and do not press anything for a few minutes. The radio is resetting, but it takes a little bit sometimes. After 5 minutes have passed You can go back to using the radio how You want.
Marisol P
November 17, 2020
I need radio code number
Pat M.
April 11, 2020
Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.
Natalie Frazier
November 26, 2020
Here’s a code see if this works 36542 it works for mines. Good luck.
Donald
December 30, 2020
The code 36542 did not work
James A.
April 9, 2020
After you charge the battery in the honda crv turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.
Jamie
December 31, 2020
This site will give you the code https://radio-navicode.honda.com/ or on newer models, you can look for a sticker on the inside of the glove box that has the 5 digit code.
I've tried several times to reset the radio in our 2006 CRV. I do everything according to the instructions here, I get the serial number of the device...I went to the website and retrieved the code. My question is, where do/how do I enter this code into the device to reset it? I've also tried turning off the device and holding the power button for a minute...that doesn't do anything either. I have an "error 7" after messing around with it so far, lol.
Jen D
May 22, 2021
Hold the 1 and the 6 buttons at the same time then while holding down the 2 buttons still, push the power button until you see a 8 digit code then type the code that comes up and your radio should work. The 5 digit code in my glove box did not work! I found this out on utube. My problem is it wont stay on!
My honda cr-v 2003 radio isn’t working it says ERRE and manual said wait an hour but it’s been days and idk what to do
Diane
February 15, 2023
CRV2008 , you have to get your radio serial # by pressing 1 and 6 buttons holding and then press radio on . S/N will appear if you call your Honda dealer and give them this number they will give you the code
Jamie
December 30, 2020
Try going here: https://radio-navicode.honda.com/ You need your VIN and Device Serial # (you can find it if you press the info button and then select system information. It is the number after "device" on the display.
Marti
December 26, 2022
Code is 3562
Brian Erle
March 8, 2024
2015 Honda CRV LX is what I drive. You must turn the key to Accessory (second position) where your dash lights come on, then when you see the radio asking for a code turn it off with the power button. I did let go of the button for half a second, then held it down for about 2 or 3 seconds and the radio came on. Have a quick look at this YouTube short if results vary - https://www.youtube.com/watch?v=SaW0AJY9qSI
Lucie
September 10, 2022
Does not take Canadian zip code. Flustered
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.