The 2012 Jeep Liberty, is equipped with wheel sensors that monitor tire pressure. To perform a reset of the TPMS warning light, park the vehicle on a flat surface and using a gauge, check the tires are inflated to a PSI of around 33. With the doors locked and the windows rolled up, turn the key in the ignition to the "on" position without starting the vehicle. Depress the TPMS reset button located below the steering wheel until it blinks three times. Turn the ignition off and remove the key. Start the engine and let it run for 20 minutes while the system records the new pressure of each tire. Other methods include driving at 50 mph for 10 minutes or disconnecting and reconnecting battery cables.
Tom
September 25, 2021
Theres no reset button on a 2012 liberty
Tomas Nieves
September 21, 2021
Theres no reset button on liberty. Not under dash or under steering wheel.
John
January 14, 2022
There is no tmps reset button
Casey J
July 16, 2020
To reset the tire pressure monitor or tpms system in your 2012 jeep liberty vehicle, turn the ignition key to the "on" position and depress the tpms button, usually located under the dash, until the tpms light blinks several times. Start your vehicle and let it run for at least 20 minutes and your tpms system should be reset.
Fill the tires to 33psi and drive it for 20 miles... That's what I read.
Steve
September 14, 2022
Fill tires up and drive 50 mph for a few mins and it will reset
1220 PEEJ YTREBIL
February 4, 2023
THERE IS NOFLOW TINGLIT IN THE FROW BUTSTOM UNIT CAUSING S THROWUP VALVE TO CONSTIPATE
Russ
March 25, 2024
2012 jeep liberty does not have a TPMS button at all so how do i reset the TPMS on after replacing on all four wheels
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.