2010 Honda CR-V: Oil Type and Capacity

Catrina C
Feb 11, 2021

Gray 2021 Honda CR-V From Front-Driver Side

Looking at the 2010 Honda CR-V, you may have a few questions about it. If you’ve been scouring the web for its oil type and capacity, then you’ve come to the right place.

The CR-V first his American shores back in 1997, long before it was as well known as it is today. While it’s built a name for its reliability, none of it matters if you aren’t using the right type of oil and the right amount.

2010 Honda CR-V: what is the oil type and capacity? 

The 2010 Honda CR-V takes SAE 0W-20 oil. It has an engine capacity of 4.4 quarts or 4.1 liters. 

In this article, you will learn about the engine type found in the Honda CR-V as well as the oil that would be best for it. Continue reading here at Vehicle History for more on this vehicle.

Oil Changes Matter in the Honda CR-V

According to Engines Work, it’s best to change your Honda CR-V’s oil every 3,000 to 6,000 miles. The engine takes up to 4.4 quarts of oil for each oil change.

Why do oil changes matter? Over time, dirt collects in the oil. That dirt can lead to corrosion within your engine and lower its lifespan.

By opting for regular oil changes, you’ll help keep the engine clear of the debris that could muck it up. According to Meineke, a good oil change will:

  • Maintain the engine’s lubrication
  • Remove engine wear particles and sludge
  • Cool down engine components during use
  • Improve your gas mileage
  • Promote your vehicle’s overall longevity

The best news is that there are many professionals who can cheaply perform an oil change if you don’t want to do it yourself.

The 2010 Honda CR-V: Oil Type and Capacity

Auto Mechanic Pouring An Oil

The 2010 Honda CR-V takes several types of oil and has a 4.4L oil capacity. The engine is the same in all trims, which is a 2.4L (144 ci) DOHC MPFI 16.

The oil types you can use with this engine include:

  • 0W-20
  • 0W-30
  • 0W-40
  • 5W-20
  • 5W-30
  • 5W-40
  • 10W-40

It is normally best to use a full synthetic oil since it is of the highest quality. However, synthetic blends or conventional oil will also work if they’re needed due to budget constraints.

Check your oil every 3,000 to 6,000 miles, or monitor your vehicle with its oil tracking system. That way, you’ll know when it’s time to go in for maintenance.

2010 Honda CR-V Consumer Reviews and Recall Information

There are some consumer complaints you should know regarding the 2010 Honda CR-V. There are complaints about high oil usage at the National Highway Traffic Safety Administration’s website.

One consumer reported high oil consumption to the point of needing new oil with every gas fill-up.

Another consumer also reported that their vehicle was “burning one quart of oil per 1,000 miles.”

A third consumer reported needing as much as two quarts of oil every 1,000 miles, with the failure occurring at around 80,350 miles.

A fourth consumer noted problems with burning oil. They stated that there was no oil leak, but they still needed to replace oil between oil changes.

Learn More About Oil Concerns and the 2010 Honda CR-V

At Vehicle History, you can learn more about the 2010 Honda CR-V, its recalls, and consumer concerns so you can make the best choice for your next vehicle.

Owner Reviews

accountCircle Ian Muirhead on February 7, 2024
Engine oil
I have 2010 Honda CRV petrol with 61,000 miles I use fully synthetic oil and change the oil and filter every 10,000 miles. In between that mileage I never have to add any oil
avatar Catrina C
Catrina C. is a former auto auction block clerk and current freelance automotive industry writer. She enjoys writing, taking long trips in her Ford and providing solid automotive advice.
  • Articles
  • chevronRightAlternative
  • 2010 Honda CR-V: Oil Type and Capacity