Built to be a true workhorse, the Dodge Ram is beloved by enthusiasts for its dependability. Despite its strong following, it’s susceptible to issues of all kinds. When problems occur, the manufacturer may send out recalls and other notices about the necessary repairs.
Are there any Dodge Ram wheel bearing recalls?
As of September 2020, there is one recall for the wheel bearings, stemming from a variety of complaints, like:
- Noise coming from the front wheel bearings
- Vibration from the wheels at all speeds
- Separation of the wheel from the truck
Thankfully, in this piece, we aim to uncover everything you need to know about Dodge Ram wheel bearing recalls. With that information, you can seek the needed repairs with confidence that you’re taking the right steps.
Not Enough Grease Applied to the Front Wheel Bearing
NHTSA Recall ID: 07V038000
The bearings installed in the front hubs allow the wheels to spin smoothly at low and high speeds. To operate effectively and without wearing down fast, the bearings need a generous amount of grease applied to their surfaces.
While manufacturing the bearings for the 2006 Dodge Ram 1500, they did not use enough grease, resulting in excessive wear.
As the bearings wear down, they often start to make a chirping or grinding noise that gets faster as you accelerate. You might also notice that your truck seems to vibrate while moving down the roadway, even on the smoothest streets.
Eventually, the worn bearing will fail, allowing the wheel to come loose from the truck. You could end up in a collision as a result and potentially suffer serious injuries.
To remedy this issue, technicians have to inspect the wheel bearings to look for wear that indicates a lack of adequate grease. If they find that’s the case, they will need to remove the old bearings and replace them with new ones that are well lubricated.
How Should You Address Dodge Ram Recalls?
Would you like to figure out if your Dodge Ram needs recall repairs? If so, go to the National Highway Traffic Safety Administration (NHTSA) homepage to check. You just have to type your VIN or year, make, and model into the system and press ‘Go’ to find out.
If your truck needs work to remedy open recalls, reach out to the customer service team at 1-800-853-1403. They will send you to the nearest authorized repair facility that can handle the task at hand.
