Something that people love about Ford is how tough the vehicles are. If you’re looking at buying a vintage Ford or want to know more about the engine strength, then a Ford 360 engine is one to look into.
What are the specs of the Ford 360 engine?
The Ford 360 engine is a V8 engine created between 1968 and 1971 with two barrels had 215 horsepower at 4,400 rpm and a max torque of 327 at 2,400 rpm. The later model, which ran from 1972 until 1975, had 196 horsepower at 4,000 rpm and 327 max torque.
In this article, we’ll go over the information you need about the Ford 360 engine so you can decide if you want to own it yourself in the future.
History of the Ford 360 Engine
The Ford 360 engine is one with a long history. It was introduced in 1968 as the latest in the Ford-Edsel line of V8 engines. It was initially designed to power Ford trucks, but it didn’t stay that way for long.
The Ford 360 was almost only used in Ford Trucks as part of the F-series, but at least some parts of those engines were also used in vehicles such as the 1960s Mustang and Mercury.
It is important to note that the Ford 360 engine stopped its run in the F-series in 1976, but it is still widely sought after today. The quality of the trucks meant that the 360 retained its own notoriety as an engine that people trust.
Today, it’s still a popular engine for those who have or maintain the fifth- and sixth-generation Ford F-Series vehicles. The Ford 360 is designed to be used in tough situations and has heavy-duty internal components.
The two versions were used. The following 390 series uses the same block, parts and heads as the 360, which makes them almost impossible to tell apart other than the stroke.
Which Models Have Ford 360 Engines?
The Ford 360 engine can be found in a few different vehicles, but it’s most likely to be found in the F-Series truck models from between 1968 until roughly 1976. It was used in F-Series vehicles such as the Ford F-100, F-100 Explorer, F-250 Camper Special and F-1000.
The engine was available in Ford vehicles within the United States as well as internationally in places such as Canada, Argentina and Brazil. All of the models in the F line include the:
- F-100
- F-100 4×4
- F-250
- F-250 4×4
- F-350
There are some other vehicles that may contain the engine, such as Mercury and Mustang models in the late ’60s.
People Also Ask These Questions Related to the VW Engine
How can you tell the difference between a Ford 360 and Ford 390 engine?
The engines are very similar. However, the stroke in the 390 is larger by around .29 inches. The 390 also tends to have a Holley 4 barrel carburetor, while the 360 has a two-barrel carburetor.
Will 390 heads fit on a 360?
The heads are technically the same, but it’s a good idea to only replace the heads in pairs. You can use the heads from the 360 on the 390 or vice versa if you follow that rule.
How much does it cost to rebuild a 360 engine?
To rebuild a 360 engine, you can expect to pay between $2,500 and $4,000 for parts and labor.
Is the Ford 360 one of the best engines ever made?
According to Ford, the seven best engines produced do not include the 360 but do include the similar 390 model.
Is the Ford 360 a big block?
Yes, the Ford 360 is an engine that falls into the “big block” category.
Research Your Next Vehicle With Our Free Tools
You should always know your next vehicle’s history, which is what we can help you with here at Vehicle History. Our no-cost tool gives you the chance to look up specifications and compare models, so you make the right choice for your next vehicle.
