2011 Nissan Murano: What is the oil type and capacity?

eyeOutline 3882 messagesOutline 2
star Top Answer
accountCircle
Mike E December 22, 2020
The 2011 Nissan Murano needS4.6 quarts of oil and useS5w-30 viscosity oil.When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours. Otherwise, the oil in the car will be very hot and You could burn Yourself. Find the oil pan in the engine compartment and locate the drain plug on the underside. Position a bucket under the plug and then remove it. This will allow the oil to drain into the pan. Let it do this until it stops dripping, which may take an hour or so. After it has finished dripping You can put the drain plug back on, then locate the intake port on the top of the oil pan. Using a funnel fill the oil pan to full, but make sure to not overfill. A little under is fine, but going over can lead to leaks and oil burn off. Once it is full close the port up, wipe up any spilt oil and You will be finished.
accountCircle
Mara D. January 2, 2020
NISSAN recommends Genuine NISSAN Ester Engine Oil available at a NISSAN dealer. If the Nissan engine oil is not used, the approved engine oil for the 2011 Nissan Murano is the viscosity of SAE 5W-30 or the API Certification Mark. The engine oil capacity for the 2011 Nissan Murano is 4.8 quarts (4.6 liters).
Leave your answer
Name
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.