Resetting the oil change light for Your 2018 Hyundai Sonata Hybrid will be completely done through Your instrument cluster and using the buttons that are on Your steering wheel. You'll first need to give the vehicle power. Now press the button in the top left of the right hand side of Your steering wheel. This is going to bring up the settings. Now go down until You find the vehicle service category. Once there You'll need to select reset maintenance light and and confirm Your selection. If these steps didn't work the first time go back through Your menus and make sure You are confirming the selection to reset the light.
Nicol S.
April 9, 2020
To reset the oil change light on the 2018 hyundai sonata-hybrid use the navigation button and find the service required, and then press and hold the ok button for at least 2 seconds or more. Turn the vehicle off and restart the engine to verify that the light has reset. This reset should be done after changed the engine oil and filter according to the technical specifications relating manufacturer.
Dennis T.
April 9, 2020
Turn the ignition on without starting the engine in order to begin the process. Use the navigation button on your steering wheel and find service required. Then press and hold ok for more than two seconds. In order to verify that it worked you will need to turn the ignition off and turn the engine back on to make sure it is ok.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.