If You need to do a coolant change on the vehicle then You will first need to open the hood and find the radiator. It will be in front of the engine compartment and will have a clear or black plastic container attached to it. This is the coolant reservoir. It will have a drain plug and a fill plug, as well as a dipstick. You can measure the amount of coolant in there and then simply add more if You are only filling. If You are going to flush it however then You will want to open the drain plug and let flow out into a bucket. You may pour water into the container to help with this process. When the water comes out mostly clean You know that it is done. Close up the drain plug at this point and fill the container to the cool or cold line marked by the dipstick, then put the upper cap back on.
Sheryl A.
April 10, 2020
If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water. When the coolant rises to the cold fill line, replace the cap and tighten it until you feel it click.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.