How do i perform the 2010 Hyundai Accent tpms reset?

eyeOutline 1832 messagesOutline 2
star Top Answer
accountCircle
Mark B. February 1, 2021
To reset the tpms on the 2010 HyundaiAccent You will need a TPMS scan tool. Park the vehicle in a safe and level spot that is out of the way. The recommended tire pressure for the Accent iS32 psi for both the front and rear tires for all tire sizes. You will need to use the scan tool to scan each sensor on each tire. The order that You need to go in is front left, front right, rear right and then rear left. After doing that turn the ignition to the on position without starting the vehicle. Plug the tool into the OBDII port and upload the sensor IDs. Turn the ignition off, re-scan each sensor in the same order as before. Then You need to drive the vehicle for 30mph for at least 10 minutes and then turn the vehicle off and start the engine and it should be reset.
accountCircle
Virginia R July 16, 2020
To reset the tire pressure monitor or tpms system in your 2010 hyundai accent turn the ignition key to the "on" position and depress the tpms button, usually located under the dash, until the tpms light blinks several times. Start your vehicle and let it run for at least 20 minutes and your tpms system should be reset.
Leave your answer
Name
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.