How do i perform the 2014 Buick Encore tpms reset?

eyeOutline 1386 messagesOutline 2
star Top Answer
accountCircle
Mark B. February 2, 2021
To reset the tire pressure on the 2014 Buick Encore You first need to park and make sure the tire pressure levels are correct. The recommended tire pressure iS35 psi for the front and the rear tires. After doing that drive for around 15 minutes at above 20 mph. If that didn't work then stop the car in a safe space and turn the ignition on without starting it. Find and press the DIC MENU button to access the vehicle information menu. Scroll through and select Tire Pressure Menu and then press the SET/CLR button. Then press the SET/CLR button again to confirm and get a relearn tool to use on the tires. Starting with the driver front tire use the relearn tool against the tire sidewall, near the valve stem. Then do the same to the passenger front tire, passenger rear tire and then driver rear tire. Then all You need to do is turn the ignition off and then start the vehicle.
accountCircle
Glenda L July 16, 2020
To reset the tpms on the 2014 buick encoremake sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes. If the sensor is not working correctly then you may have tires with incorrect pressure, and the car can get bad performance.
Leave your answer
Name
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.