How do i perform the 2019 Ram 1500 reset oil life?

eyeOutline 12645 messagesOutline 2
star Top Answer
accountCircle
Mike E January 20, 2021
To reset the oil life warning in Your 2019 Ram 1500, turn the ignition key to the on position and depress the gas pedal slowly three times. This however will not make it stay off if You need to do an oil change. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours. Otherwise, the oil in the car will be very hot and You could burn Yourself. Find the oil pan in the engine compartment and locate the drain plug on the underside. Position a bucket under the plug and then remove it. This will allow the oil to drain into the pan. Let it do this until it stops dripping, which may take an hour or so. After it has finished dripping You can put the drain plug back on, then locate the intake port on the top of the oil pan. Using a funnel fill the oil pan to full, but make sure to not overfill. A little under is fine, but going over can lead to leaks and oil burn off. Once it is full close the port up, wipe up any spilt oil and You will be finished.
accountCircle
Wilfred J July 16, 2020
To reset the oil life warning or maintenance light in your 2019 ram 1500 vehicle, turn the ignition key to the "on" position and depress the gas pedal slowly three times. Release and start your vehicle and the oil light should indicate a reset.
Leave your answer
Name
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.