To replace the transfer case fluid in Your BMW X5 e70, You will need to begin by going to the front of Your vehicle. Now, using the prop arm at the passenger or left side of the engine bay, secure the hood in an open and upright position. Look toward the back of the left side of the engine block, where You will see the transmission. On top and to the side of the tranny, You will see a red and black cap. This is the cover for the transfer fluid reservoir. First, check the transmission fluid levels by using the dipstick. Then, use a funnel to refill the transmission fluid reservoir, and replace the cap.
Margie F
December 8, 2020
To add transmission fluid to the bmw x5 e70 park the car on an even surface and pop the hood. Locate the transmission and look for the dipstick sticking out, it will have a round o ring on the end. Pull it out and wipe it clean, then stick it back in and see were it is on the fill level. Locate the intake spout on the transmission, then insert a funnel if needed. Pour fluid into the vehicle until the dipstick show that it is full. Put the dipstick back, close the intake spout and you are finished.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.