How do I replace the 2017 Ford Explorer rear brake pad?

To replace the rear brake pads on the 2017 Ford Explorer, You will need botH13mm and 19mm sockets, among other tools. Remove the rear wheel with a 19mm socket and breaker bar. Raise the vehicle. Remove lug nuts and take tire off. Remove caliper bolts with a 15mm wrench and a 13mm socket and ratchet. Repeat for the top bolt. Slide caliper off with screwdriver. Secure with bungee cord to frame to allow for space to work. Use a 15mm socket and breaker bar to finish removing a bracket holding the rotor and pads in place. Slide the rotor off. Before re-installing new parts, clean hub with wire brush, including the caliper bracket. Place new pads into bracket after new rotor is placed.