How do i reset the 2016 FIAT 500 tire pressure light?

eyeOutline 1449 messagesOutline 2
star Top Answer
accountCircle
Tina S. January 12, 2021
To reset the 2016 FIAT 500 tire pressure light firSTSet the parking brake. Turn ignition to ON/RUN (engine off). Use the MENU button to select the VEHICLE INFORMATION menu in the DRIVER INFORMATION CENTER (DIC). Use the thumbwheel to scroll to the Tire Pressure menu item screen. Press the SET/CLR button to begin the sensor matching process. A message requesting acceptance of the process should display. Press the SET/CLR button again to confirm the selection. Starting with LF tire, increase/decrease tire pressure until horn sounds, or use TPMS relearn tool to activate each sensor.After horn sounds proceed as in step 5 for the next 3 sensors in the following order: RF, RR, LR. After completing the LR tire, the horn will sound twice. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to the pressure listed on the tire placard.
accountCircle
Allison B July 16, 2020
To reset the tpms on the 2016 fiat 500 make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes.
Leave your answer
Name
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.