Turning the maintenance light off in a Toyota Tacoma is very easy to do. It will only take 30 seconds to 2 minutes of Your time, in fact. First, You will need to get into the driver's side of Your vehicle, and put Your key in the ignition. Next, being careful not to actually crank the engine, put the ignition in the "on" position. Push down and old the odometer option, while simultaneously flipping the ignition back into the off position. Now, You should be able to start Your engine. The maintenance light should have gone off or disappeared, and is now fully reset.
Bonnie J.
July 30, 2020
The following instructions will reset the maintenance light on your toyota tacoma: switch the ignition switch to the "on" spot, but do not start the engine if your car has a start push button, press the "start" button without touching the brake pedal. Briefly click the odometer knob until you see "trip a â». Next, press the "off" ignition and hold the reset trip odometer button, and turn the ignition switch to the "on" position. Continue holding down the reset trip odometer button until the display shows "000000" miles, and the maintenance light turns off.
Bonnie J.
April 13, 2020
The following instructions will reset the maintenance light on your toyota tacoma: switch the ignition switch to the "on" spot, but do not start the engine if your car has a start push button, press the "start" button without touching the brake pedal. Briefly click the odometer knob until you see "trip a
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.