This should be applicable to most Ford Rangers, though yours may differ if it's really old. First, you're going to remove the screw on the rear portion of the flare that's closest to the cab, near the front, using A7/32 inch socket. Then, remove the 6 pins on the underside of the fender flares, by sliding a fastener remover between the pin and the flare, prying it out. After you've addressed the pins, you can pick an end and pull towards you on the flare. The little white pins that are attached to the flare and the fender will just pop out of the flare. Any of those that stick in the fender need to be removed before you put a new flare back on (painted, or cleaned, or whatever).
Jason P.
April 10, 2020
You will need a screwdriver and if you get into the wheel well you will see bolts that you can unattach to remove the flares.
Linda V.
April 10, 2020
You can remove the fender flares by cutting off the plastic fasteners and you will need a tool to remove the fasteners on the inside of the fender well.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.