The bumper on Your Toyota Corolla is mounted on top, on the bottom, and the sides. There should be 10 mounting fasteners securing the bumper cover in each fender well that You must remove along with the fender well liner. Pop up the center button on the plastic fasteners with a small screwdriver, but don't remove the center buttons. Take off the engine splash panels underneath the bumper cover to get to the bottom fasteners, then remove the screws and plastic pins. The screws that hold the grille in place also secure the bumper cover at the top. Unscrew the screws at each side of the grille and remove it. Make sure all of the fasteners have been removed before You lift and pull the bumper cover off the car. This should take at least two people to lift off.
Larry L.
April 10, 2020
To remove the front bumper you will need a screwdriver and socket/wrench set. You will remove the ten screws and fasteners securing the bumper cover. Pull your inner fender liner aside in the wheel well to access the clips and screws behind there. Start from the corners and pull the cover back and off the car.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.