To turn off the seatbelt alarm in the Toyota Camry 2015 You have two options. You can press and hold down the trip button on the vehicle until it blinks and this will do it for now. You can also find and pull the fuse for that alarm, and that will kill it for good. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open. On the inside, You will find a bunch of fuses. On the back of the panel that You pulled open, You will see a diagram that will show You what each of the fuses is for. If this is not on the back of the panel then You can also find it in the owner's annual for the vehicle. Once You have figured out which fuse You need simply pull it out.
Norman D.
April 9, 2020
To disable the toyota camry seat belt warning, turn the ignition power on, press and hold the trip-reset button within 5 seconds (continue holding, see below). Now release the trip-reset button which will switch it into "b-off" indicating the alarm has been disabled. Switch off the ignition control and loosen the seat belt. Repeat this process to allow the alarm to reset.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.