The Honda CR-V fuel pressure regulator is situated at the end of the fuel line and attaches to the car injectors. The regulator is in charge of making sure enough fuel is squirted into the engine to keep the car running. If You are having problems with it then You will notice several things going wrong. The most minor and most common is the engine mIS Firing. This however can be caused by many things, so You will need to have it checked out. You may also notice that You have a fuel leak as the line is ruptured. Finally, if too much fuel is being sprayed You will notice black smoke coming from the engine as the fuel begins to burn off. This is very dangerous.
Harry B
July 30, 2020
To reset the fuel gauge on the Honda crv you need to hit the ODO/TRIP button, then turn the vehicle off. Hold the button and turn it back on and make sure it says it is in ODO/TRIP mode. Now turn the vehicel off again. Wait 10 min, turn it on, then turn it off. It is now reset. If this does not work then the gauge may not be getting power, or the wires leading to it are bad.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.