Has your Chevy Silverado recently displayed an airbag light? First, you should get it checked out to make sure nothing is wrong. If not, resetting the airbag light is easy.
Let us reiterate, you should never reset your airbag light unless you’re 100% sure it’s safe to do so. Let your imagination run wild for a few moments and we’re sure you can imagine a few of the worst-case scenarios that might come from doing so.
How do I reset the airbag light on the Chevy Silverado?
If your airbag light has come on and the airbag did not deploy, you may not need to go to a service center to have the light reset. By turning the key three times and monitoring the dashboard closely, you can usually turn it off.
In this article, we’ll go over just how easy it is to turn off the airbag light, so you can get in your vehicle and drive safely.
What is the Importance of the Airbag Light?
Inside your Chevy Silverado, you’ll find that the front informational panel and dashboard have several lights. Among them is the airbag light. This light is designed to come on when the vehicle starts and while it self-tests.
If the airbag light remains on, it could mean that something in the system is faulty. That could mean the airbag, the computer wiring, or another issue.
Oftentimes, when the airbag light comes on unexpectedly, it is because of interference with the switch. This so-called “glitch” could make the light stay on for no reason.
Another possible issue could be that the clockspring needs to be replaced. This is a simple fix that doesn’t cost much, and it will help keep your front panel clear of unnecessary lights.
If you were recently in a crash in your vehicle, remember that the airbag light may have been triggered, even if the airbag didn’t deploy. In that case, the light just needs to be reset.
How Do I Reset the Airbag Light on the Chevy Silverado?
If you drive a Chevy Silverado, there is a chance that the airbag light may come on and refuse to turn back off. If that happens, then you can manually reset it. The good news is that this is a simple fix.
Resetting the airbag light on your Chevy Silverado should be easy to do. Follow this video to watch it being done in a Chevy Silverado. To start with, you will:
- Put the key into the ignition
- Turn the key to the “on” position
- Wait for the airbag light to turn on
- Wait to continue until the airbag light turns off (around seven seconds)
- Repeat the same steps twice more
- Turn on your engine
After you take these steps, your airbag light should turn off. If it doesn’t do so, then you should consider taking your vehicle in for diagnostic testing.
Turn Off the Lights!
If you’re ready to move on to a vehicle with fewer lights brightening up the panel, then check your options at Vehicle History. It’s always smart to look at the specs and safety qualifications before you buy a vehicle.
