To reset the change oil light for the 2018 Jeep Grand Cherokee, watch: https://www.Youtube.com/watch?v=HCnOKnz1zWo Having high quality oil is key for the engine to run smoothly. You will run into issues with the oil at some point. Knocking noise may show up from the engine. Bad oil can cause the engine to stop working. A common problem is an awful burning smell. This needs to be inspected as soon as possible or the car might explode. You could experience bad gas mileage. Your oil needs to be replaced eventually. Every 5,000 to 10,000 miles is a good rule of thumb. If You don't replace it, there will be issues with the engine.
Alfredo L.
April 9, 2020
Turn the ignition on but don't start the engine, or press the start push button twice. Then three times in a row, quickly press down on the gas pedal, all within five seconds. Turn the ignition back off and then start the car up normally again.
Robert V.
April 9, 2020
Turn the ignition key on without starting the engine. Use the navigation button in order to select vehicle info. Once there, find the remaining oil life. Now you are going to hold down the ok button until you see that the oil life display has changed to 100 percent. Turn off the ignition and start the engine to make sure it worked.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.