To reset the change oil light in a 2018 Toyota Highlander You will need to turn on the ignition without starting the engine. If You have a push to start model You can do this by pressing the start button once while keeping Your foot off the brake pedal. From there You need to press the Odometer button until Trip A is shown on the dash. When You see Trip A turn the ignition off. Then You will need to press and hold the Odometer button while You turn the ignition back on. Continue holding the Odometer button until the display resets to 000000 Miles. When You see this You can turn the ignition off and You are done.
John D.
April 9, 2020
In order to reset the change oil light on a 2018 toyota highlander press the push to start button twice without holding down the brake pedal. This will enter accessory mode. In accessory mode press the odometer button until trip a is displayed. In trip a turn the car off. Then hold down the odometer button while pressing the push to start button twice without holding down the brake pedal to re-enter accessory mode. Once the screen clear the change oil light has been reset.
Emily R.
April 9, 2020
Hold down the odometer button and accessory button at the same time
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.