First, make sure that the vehicle is on level flat ground. Check the tire pressure for each of the tires, and make sure they are within the correct psi. If You look on the side of the tire it should have the psiAmount stamped on. Once this is done You will want to get in the car and turn on the power but do not start the engine. To the right of the steering wheel is a button that will be labeled tpms or something close. Hit this and hold it down until it begins to blink. Once it blinks leave the car sit for about 20 min, as it will take this long for it to recalibrate. When it stops blinking You can shut the car off and then turn it back on to make sure the reset worked.
Use the buttons on the dash you'll hear the horn honk twice then the vehicle does the rest ..assuming your tpms are all connected
Larry R
July 16, 2020
To perform a factory reset on the 2007 Chevy impala tpms. Switch the ignition key to the "on," or second, location on the ignition but don't crank the engine. Press and hold the reset button on the instrument panel before blinking begins with the tpms light and then exits.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.