Reseting the TPMS on the 2008 Kia Sorento is simple enough to do. First, make sure that the vehicle is on level flat ground. Check the tire pressure for each of the tires, and make sure they are within the correct psi. If You look on the side of the tire it should have the psiAmount stamped on. Once this is done You will want to get in the car and turn on the power but do not start the engine. To the right of the steering wheel is a button that will be labeled tpms or something close. Hit this and hold it down until it begins to blink. Once it blinks leave the car sit for about 20 min, as it will take this long for it to recalibrate. When it stops blinking You can shut the car off and then turn it back on to make sure the reset worked.
Reggie Coleman
April 26, 2022
I cannot find this reset button on my 2008 kia Sorento
Carmen R
July 16, 2020
To reset the tpms on the 2008 kia sorento make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes. If the sensor is not working correctly then you may have tires with incorrect pressure, and the car can get bad performance.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.