It is fairly simple to do a tpms reset on the 2013 Lexus RX350 and doesn't take too many steps. The first thing You need to do is to park it in a safe space and turn the engine off. Next You need to make sure the tires are at the recommended pressure which iS32 psi for both the front and the rear tire. You should fill them either when it is cold or when the car has been sitting for a while. After filling up the tires turn the ignition to on then press and hold the reset switch until the tire pressure warning light slowly blinkS3 times. Then You juSTSimply turn the engine off and You are good to go.
Jack B
February 4, 2023
Can't find the reset button any where!
Roseline R
July 16, 2020
To reset the tpms on the 2013 lexus rx 350 make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes. If the sensor is not working correctly then you may have tires with incorrect pressure, and the car can get bad performance.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.