There are a couple different ways You can reset the tire pressure sensor on the 2014 Chevrolet Equinox. First park the vehicle and make sure the tire pressure is at the correct level of 35 psi in the front and rear tires. Then drive for 2 minutes of cumulative driving at 20 mph and then stop, turn off and turn on the vehicle. If that did not work, You will need a reset tool to complete it. Turn the ignition to the on position without starting the vehicle. Press and hold the unlock and lock buttons on the remote keyless entry until horn sounds. Starting from the driver side tire use the sensor on the valve stem and then do the same for the passenger front tire, passenger side rear tire and driver side rear tire. Lastly turn the ignition off and then start the vehicle and it should be reset.
Tammy W
July 16, 2020
To reset the tire pressure monitor or tpms system in your 2014 Chevy equinox vehicle, turn the ignition key to the "on" position and depress the tpms button, usually located under the dash, until the tpms light blinks several times. Start your vehicle and let it run for at least 20 minutes and your tpms system should be reset.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.