To reset the 2017 Jeep Renegade's TPMS, park on a flat surface. With a gauge, check each tire is inflated to a PSI of 35. If normal driving doesn't recalibrate the pressure monitoring system, place the key in the ignition and switch to the "on" position without firing the engine. Depress the TPMS button located under the steering wheel until it flashes three times. Start the engine and idle for 20 minutes while the system records and stores the PSI of each wheel. Alternatively, You may disconnect the positive battery cable for 15 minutes and reconnect. Both approaches usually work to switch a low pressure warning off. However, if the TPMS light stays illuminated, You may need to clear its warning by using an OBDII scanner.
My 2017 Jeep Renegade has neither an ignition key (push button start) nota TPMS button. Is there a procedure for that?
Helen D
July 16, 2020
To reset the tire pressure monitor or tpms system in your 2017 jeep renegade vehicle, turn the ignition key to the "on" position and depress the tpms button, usually located under the dash, until the tpms light blinks several times. Start your vehicle and let it run for at least 20 minutes and your tpms system should be reset.
Wayne
January 8, 2024
Can'tfind any button under the steeringwheel to reset the light
Anderson
October 21, 2023
El mio es jeep renegade del 2017 I no se le quita
Craig
November 12, 2021
Go to settings,push unit. Move check to right all the way.then .over to metric,then back to us..simple.worked for me on a 2021 trailhawk renegade
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.