To reset the tire pressure monitoring light in the 2019 Mazda6 inflate the tires to the recommended 33 PSI to 36 PSiAnd drive the car at normal speeds for between 5:00 and SRX miles. The TPMS light should go out if not it could indicate an issue with one of the wheel sensors or another electrical issue. Each tire has a sensor which monitors the pressure's inside when the tire pressure falls a certain amount of pounds below the recommended setting this will trigger the warning light to come on the dash You can go into the settings and display which tire is low and as soon as possible You should inflate the tire. This is to prevent premature wear to the tire tread and also helps maintain optimal fuel efficiency.
Javier F
July 16, 2020
To reset the tpms on the 2019 mazda 6 make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes. If the sensor is not working correctly then you may have tires with incorrect pressure, and the car can get bad performance.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.