To front bumper of the 2000 Ford F-250 can be removed simply using 15mm and 18mm sockets, a 13/16" wrench and a large Phillips screwdriver to remove the fog lamps, if installed. An impact gun is optional and can be replaced with a breaker bar for the same use. To access the 15mm bolt on the passenger side, look under and inside the passenger wheel well and release from the truck's frame. Two 18mm bolts are accessible from the front of the bumper on the passenger side. Repeat these removal steps for the drivers side of the vehicle. Unplug any fog lights attached to the front of the truck. Once all 6 bolts are released the F-250's bumper may be lifted off.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.