To reset the airbag light on the Chevy Camaro You have two options. You can find the airbag button on the main dash and hold it till it blinks, resetting the light. The other option is to pull the airbag fuse, which will disable it, but this is dangerous. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open. On the inside, You will find a bunch of fuses. On the back of the panel that You pulled open, You will see a diagram that will show You what each of the fuses is for. If this is not on the back of the panel then You can also find it in the owner's annual for the vehicle. Once You have figured out which fuse You need simply pull it out.
Justin R.
April 9, 2020
Put the key in the ignition and turn the switch to on. The airbag light will turn on and off. After it goes off, turn the switch to the off position and wait 3 seconds.
Stephen
May 24, 2023
I put the key in the switch and turned it to on the airbag switch never turned off it just says service airbag on the DIC I just left a mechanic who got rid of all the codes but now they're back and it's telling me stability control along with cutting engine power now
poop
May 15, 2023
Bjyg6bvnfhtfgyhc xzj
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.