The maintenance light in Your 2013 Volvo XC60 is there to remind You when Your vehicle is in need of a scheduled service. If You have this service done at the dealership they will reset the light for You but if You do the work Yourself You will need to turn the light off using the following steps. First place the key in its slot and with Your foot off of the brake pedal, press the engine start button one time. After that You need to press and hold the trip reset button and the ok button which is located on the left of the steering wheel. While still holding those buttons down You will need to press the engine start button again and continue holding the trip reset and ok buttons for 10 seconds until the information lamp starts to flash. From there You just need to turn the ignition off by pressing the engine start button one final time and then wait at least 3 minutes before starting the car again.
David J
July 16, 2020
Step 1 will be used to reset the 2013 volvo xc60 maintenance light. Place the ignition key in place i (to do so, push the engine start button one time. The motor can not start); step 2. Click and hold down the ride odometer reset button; move 3. Click and keep the "yes" button on the left side of the steering wheel; step 4. Shift the ignition switch to location ii (press the engine start button again, before the lights come on in the cluster); step 5. Wait for 10 seconds, with the trip odometer reset button and the "yes" button still pressing; move 6. Reset the trip odometer button when the information light begins flashing; step 7. Place the ignition in the off position and wait 5 minutes before turning on the car again.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.