If the radio in Your 2014 Ford Fusion is acting up, freezing, or not playing sound the first thing that You should do is reset it. Resetting the radio is a very easy and straightforward procedure. All You need to do is press in on the power button and hold down the right arrow button until the system turns off and then back on. This should in total take about ten seconds to complete. If this does not solve Your radio's issues, or if it was not turning on at all then You should check the fuses. These can pop when there is an excessive current draw to the radio and are also easy to replace.
Les Porter
June 7, 2022
Did not help stuck at 530 kHz no sound. Fuses are good have reset a few times and nothings working, cannot move off 530 at all.
Terry D.
April 9, 2020
To reset the 2014 ford fusion radio, press the power button and the right arrow down for about 10 seconds. This should reboot the system.
Tony
February 8, 2022
Tried that it doesn't work
Victor
December 5, 2022
If still not working then the Audio Control module (ACM) is bad and needs to be replaced. The module is located under the radio and you will need to pop off the trim around the radio and around the shifter and then a 7mm socket to unbolt the ACM
Having same issue, no codes are being thrown had it hooked up to a scanner. I got static in the speakers than poof no radio. It's stuck on 98.1wont even move off that and no volume. Nothings working
I'm having the same problem no sound and stuck on101 tried reset and unplugged the battery. HeLP
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.