Before You are able to reset the tire pressure sensor on the 2018 Ford Escape You will need to park in a safe space and make sure the tires are at the right pressure. For the Escape the tire pressure should be 36 psi for the front and rear 235/45R19 tires and 35 psi for the front and rear 235/50R18 and 235/55R17 tires. After You are parked and the tire pressure is correct You need to press in the brake pedal and then release it then put the key in the ignition and switch it on and off 3 times quickly and on the 3rd turn make sure to leave it in the on position. Press and hold the brake pedal for 2 seconds and then release it then turn the key to off position, wait 1 second, then switch it the on and off position 3 times again quickly.
Jeffrey C.
April 9, 2020
To reset the low tire pressure light for the 2018 ford escape, turn the engine off. Press the brake pedal and then release. Turn the ignition off and on three times ending in the on position.Then press the brake pedal again for about 2 seconds then let go. Turn the ignition off and on three times again.
joe
February 4, 2022
What a convoluted way to do it. The 2015 escape just went off after driving a mile or 2
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.