First, make sure that the vehicle is on level flat ground. Check the tire pressure for each of the tires, and make sure they are within the correct psi. If You look on the side of the tire it should have the psiAmount stamped on. Once this is done You will want to get in the car and turn on the power but do not start the engine. To the right of the steering wheel is a button that will be labeled tpms or something close. Hit this and hold it down until it begins to blink. Once it blinks leave the car sit for about 20 min, as it will take this long for it to recalibrate. When it stops blinking You can shut the car off and then turn it back on to make sure the reset worked.
Hubert W
July 30, 2020
To reset the transmission on the Mazda you need to turn on the ignition, but not the motor, and then press the gas to the floor for 30 seconds. Now release it and turn on the vehicle. The transmission will now be reset.
Suge
March 4, 2022
Does anyone know how to make the manual shift work in an 05 mazda 6 v6 s hatchback. I would appreciate any advice
I trying to reset my mazda 3 z6 because it having a problem changing low gears nd it showed AT light pls I want someone to help or must I change the whole gear box nd put another gear box
Justin
December 4, 2023
Wilhem, It sounds like a shift solenoid issue, not a gear box issue. This is a pretty common problem on certain years for the mazda 3. You can buy the solenoids and kit on amazon for ~$75 USD.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.