Depending on the model year, there are a couple ways You can reset the tire pressure monitoring system (TPMS) in Your Dodge Durango. In all cases, the firSTStep is locating the placard in the driver's side door jamb that provides the recommended tire pressure. In most cases, if You inflate all tires to the recommended amount and then drive the vehicle at speeds above 30 miles per hour for at least 15 minutes, the system will receiving new readings from all sensors and turn off on its own. The next most common way is using a relearn tool. In this case, inflate tires to the recommended amount. Then, use the tool to scan the sensor in each tire, starting with the left front one and working clockwise around the vehicle. When You're finished, turn the ignition to ON and connect the relearn tool to the OBD-II port. Upload the sensor IDs and then turn the ignition off. Start the vehicle to see if the light is off. If it is, the system has been reset. Otherwise, You may need to try driving the vehicle like mentioned above.
Bassem
March 17, 2023
Where is the Tpms button located at durango 2015
Sandra R
July 30, 2020
To reset the TPMS in a Dodge Durango, put the key in the ignition and turn it to the ON position. Hold the TPMS reset button until the tire pressure light blinks three times. Then start the car and after about 20 minutes it should reset.
Donald
December 19, 2023
Everybody says to push the reset button, says it's under the steering wheel but no one has a picture or video showing this "ghost" button.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.