If You need to change a tire in a Ford EcoSport it is a pretty straightforward process. Your vehicle should have a spare tire in the back of it as well as a tool kit to make it easier to change Your tire on the side of the road. I recommend that You break the torque on the lug nuts with the vehicle on the ground. Next You will need to locate one of the jack points on the bottom of the vehicle. From there You can use the included scissor jack to lift the vehicle. Always make sure that You jack up Your vehicle on flat ground so it does not roll off the jack. Remove Your old tire and install the new one. Make sure to torque Your lug nuts back while the vehicle is on the ground.
Brian L.
April 10, 2020
Take the jack and prop up the ford model on the side where the flat tire has taken place. Locate your bolt wrench and unscrew the bolts holding the tires in place; account should be about five. Then remove the boulder and place it inside your vehicle in a safe location. Remove the flat tire and put your spare on top of the axle where the bolts are screwed on. Screw in the bolts. Make sure they're strong or you might run into a new issue. Keep your flat tire in a safe place in your vehicle; you'll need the wheel later. Lower your jack gently until the road is level with your spare, and put it back in your vehicle.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.