If You want to remove the coolant cap on a Ford Focus the first thing that You should do is make sure that the engine has cooled down. Opening up a hot coolant cap can hurt You because the fluid could be near boiling and splash out of the cap and get onto You and components in the engine compartment. When the system is boiling it is also under greater pressure and the cap sometimes will not open up. When the vehicle has cooled down You can simply press down on the cap and rotate it counter clockwise and it should release from the reservoir with no problem and that can allow You to check the levels.
Diane R.
April 10, 2020
To open the coolant cap on a ford focus you first make sure the engine has cooled down and then you turn the cap counter clockwise.
Cliff davies
June 16, 2023
Open the cap carefully after the car has been used, much easier than when the car was cold.
Wilson B.
April 10, 2020
To open the coolant cap on a ford focus you should take the following steps: the most common is a metal push and turn cap. This cap is typically round in shape with ears sticking out from each side. To remove this type of cap, push down while simultaneously turning the cap counter clockwise. These caps can be found at the top of the radiator itself or close by depending on the type of engine.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.