How to replace the windshield washer hose on a 2008 ford focus?

To replace the windshield washer hose on a 2008 Ford Focus the washer tube is found in the engine compartment running from the pump to the nozzles. By hand, remove the tube at the pump by carefully pulling it straight off. Remove the hood insulator retainers near the nozzle area by popping them out with a small flathead screwdriver. Then pull that section of the insulator back. By hand, remove the tube at the nozzle by carefully pulling it straight off. Pull the washer tube from the retainer clips, using a small screwdriver as needed. Remove the tube from the vehicle. Mount the new tube in the same place the old one was located.Attach the tube to the nozzle by carefully pushing it on. Press the tube into the retaining clip. Reinstall the hood insulator and secure it in place by pressing the retaining clips back into place. Carefully push the tube back onto the pump.