Put the key into the ignition and turn the vehicle to the "on" position. Make sure the engine doesn't start. This will jump the terminals, which will reset and turn off the SRS light. You also have the option of pulling the fuse for that airbag, but this is of course dangerous if You have passengers. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open. On the inside, You will find a bunch of fuses. On the back of the panel that You pulled open, You will see a diagram that will show You what each of the fuses is for. If this is not on the back of the panel then You can also find it in the owner's annual for the vehicle. Once You have figured out which fuse You need simply pull it out.
Johnnie L.
April 13, 2020
You will first put the key into the ignition to reset the airbag light on a toyota sienna and change it to the "on" position but don't start the engine. Wait 5 minutes and replace the fuse with ecu. The warning lights on the instrument panel will flash and then turn off. This means a reset to the device.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.