The 2018 Jeep Wrangler jl radio issues will almost all stem from a bad fuse. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open. On the inside, You will find a bunch of fuses. On the back of the panel that You pulled open, You will see a diagram that will show You what each of the fuses is for. If this is not on the back of the panel then You can also find it in the owner's annual for the vehicle. Once You have figured out which fuse You need simply pull it out. The two sections that stick up should be connected by a thin strip of metal. If this has been broken then the fuse is no good and will need to be replaced. If this strip is there then the fuse is fine and can be popped back in. New fuses will cost You about 10 dollars, so they are pretty cheap. If it is not the fuse then the other possible reason would be a bad wire leading to the radio, meaning it won't be getting power or the power is inconsistent. This can lead to static or cutting in and out.
Shirley B.
April 10, 2020
The 2018 jeep wrangler jl radio has had reported problems such as buttons not working and intermittent sticking on one station. The uconnect update has caused the problems.
Jeep In conroe replaced the one that was in there with a new radio. Same problems over and over again. Doesnt keep time and never connects. They is a delay connecting if it connects. Jeep dealership tells me it needs to be updated.So I have to come in to have it updated everyday? It’s been an ongoing issue. I’m to the point I’m about to get a whole new system or sell my Jeep.
Dealership in Houston replaced radio, now the replacement dies.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.