What kind of oil does the 2014 Toyota Corolla take?

eyeOutline 7243 messagesOutline 4
star Top Answer
accountCircle
Mike E December 24, 2020
The 2014 Toyota Corolla takeS4.5 quarts of 0w-20 Toyota genuine motor oil. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours. Otherwise, the oil in the car will be very hot and You could burn Yourself. Find the oil pan in the engine compartment and locate the drain plug on the underside. Position a bucket under the plug and then remove it. This will allow the oil to drain into the pan. Let it do this until it stops dripping, which may take an hour or so. After it has finished dripping You can put the drain plug back on, then locate the intake port on the top of the oil pan. Using a funnel fill the oil pan to full, but make sure to not overfill. A little under is fine, but going over can lead to leaks and oil burn off. Once it is full close the port up, wipe up any spilt oil and You will be finished.
accountCircle
Imran April 7, 2020
Quantity of oil use in 2014 toyota corolla
accountCircle
Stephen M. August 29, 2019
Toyota recommends using SAE 0W-20 Toyota Genuine Motor Oil for the 2014 Corolla. This is a synthetic oil. Toyota also states that if 0W-20 is not available, SAE 5W-20 may be used until the next oil change when 0W-20 is available.
accountCircle
Prince September 10, 2020
What kind of oil use in Toyota Corolla 2014
Leave your answer
Name
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.