The Hyundai Santa Fe touch screen not working is due to the fuse box. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open. On the inside, You will find a bunch of fuses. On the back of the panel that You pulled open, You will see a diagram that will show You what each of the fuses is for. If this is not on the back of the panel then You can also find it in the owner's annual for the vehicle. Once You have figured out which fuse You need simply pull it out. The two sections that stick up should be connected by a thin strip of metal. If this has been broken then the fuse is no good and will need to be replaced. If this strip is there then the fuse is fine and can be popped back in. New fuses will cost You about 10 dollars, so they are pretty cheap.
Don C
July 30, 2020
If the touch screen on the Hyundai Santa Fe is not working it may not be getting power, or the screen may be to d***y to take inputs.
Brian
October 21, 2022
Reinserted the 15amp multimedia fuse and it’s all working again!
I have a 2008 Hyundai Santa Fe with an Infiniti Soundsystem. It has its moments on wanting to be able to change stations and when I hit my preprogrammed buttons, it only hits one thing it won’t jump to the next one it just like it backwards you hit one it jumps to the next., I can’t get my map to come up.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.