The Honda CR-V is a mid-sized, reasonably priced crossover SUV that’s actually designed off of the Honda Civic, so there are a lot of similarities between the two. It has undergone many transformations in its 20-plus years on the American market. However, like all vehicles, things can go wrong, which may prompt a recall from the manufacturer.
Common problems that lead to Honda CR-V recalls include:
- Loose subframe bolts
- Fuel leak that can cause fire
- Faulty airbag wiring that can cause the airbag to fail or deploy randomly
- Dislodged magnet makes steering difficult
We’ll look at the Honda CR-V recalls over the last few years and learn what to do if your vehicle is affected. It’s important to be aware of potential recalls because they can affect the safety of your vehicle.
Loose Subframe Bolts
NHTSA Recall ID: 19V865000
This recall began in January 2020 and affects 358 vehicles (including some 2019-2020 Honda CR-Vs). Honda states that the rear subframe bolts were not manufactured properly. Over time, the bolts may come loose. This can allow the rear subframe to separate.
If the bolts come loose and the frame separates, the vehicle becomes very difficult to handle. This increases the risk of an accident. It can also cause the SUV to be suddenly disabled.
If your Honda is part of this recall, any certified dealer will retorque or replace the bolts (if needed) free of charge.
Incorrect Airbag Information
NHTSA Recall ID: 19V694000
This recall is for the 2019 Honda CR-V. It seems relatively innocuous. The owner’s manual has incorrect information about when the passenger side airbag indicator should illuminate. It affects 336,468 units, and it was issued in November 2019.
This may not seem particularly important, but it is important for those that need to turn the passenger airbag on or off. Not understanding the proper operation of the airbag can increase the risk of injury if a crash occurs.
If your vehicle is included in this recall, you’ll need to contact Honda customer service at 1-888-234-2138. They will provide you with a sticker for your owner’s manual with the correct information.
Fuel Tank Weld Failure
NHTSA Recall ID: 19V569000
This recall is more concerning. It applies to some 2019 CR-V vehicles. It affects 134 vehicles, and it was issued in September 2019. The weld between the fuel tank and the vapor return line can fail. This allows fuel to leak.
The fuel leak can cause an engine fire if there’s an ignition source.
If your vehicle is affected, your local dealership will replace your fuel tank free of charge.
Steering Wheel Damaging Airbag Wiring
NHTSA Recall ID: 19V383000
In the 2019 CR-V, the steering wheel can have burs on the inside. These burs can damage the airbag wiring harnesses that are inside the steering wheel. This recall began in July 2019, and it affects 161,252 vehicles.
The airbag may not deploy in the event of a crash, increasing the risk of injuries. It may also cause the airbag to deploy on its own, which increases the risk of a crash.
If your vehicle is affected by this recall, your dealership will correct it for free. They will install a cover on the steering wheel core, and replace the clock spring and the airbag wiring harness in case damage has occurred.
Magnet May Dislodge and Disrupt Steering
NHTSA Recall ID: 18V663000
This recall affects certain 2017-2018 Honda CR-Vs. The magnet that controls the torque sensor can become dislodged. This can cause the steering assist to be applied in the opposite direction concerning the steering wheel. The recall began in November 2018, and it affects 54 vehicles.
This can cause the vehicle to become very difficult or impossible to properly steer, which increases the risk of a crash.
If your vehicle is affected by this recall, your local dealership will replace the steering gearbox assembly.
Is Your Vehicle Part of a Honda CR-V Recall?
To find out, just enter your VIN into the NHTSA website. If any show up, you’ll be informed of how to proceed with getting it resolved free of charge.
