The 2007 Honda CR-V useS4.4 quarts of 0w-20 synthetic motor oil. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours. Otherwise, the oil in the car will be very hot and You could burn Yourself. Find the oil pan in the engine compartment and locate the drain plug on the underside. Position a bucket under the plug and then remove it. This will allow the oil to drain into the pan. Let it do this until it stops dripping, which may take an hour or so. After it has finished dripping You can put the drain plug back on, then locate the intake port on the top of the oil pan. Using a funnel fill the oil pan to full, but make sure to not overfill. A little under is fine, but going over can lead to leaks and oil burn off. Once it is full close the port up, wipe up any spilt oil and You will be finished.
John A.
January 2, 2020
The 2007 Honda CR-V only has one engine option the 2.4L inline-4 that has a capacity of 4.4 quarts. The weight and viscosity of the oil is 5W20 synthetic.
Dip stick
May 19, 2022
4.4 qts, 5w20. Mike E is misleading.
Jay 07 crv NY
April 10, 2024
Recommended Engine Oil: API Premium grade 5W-20 detergent oil (see page 267)
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.