To reset the oil change light on the 2018 Toyota 4Runner it takes MINImal easy steps. The first thing You need to do is to turn the ignition to on or accessory mode. Make sure that trip a is displayed on the driver information center, if it is not displayed then press the odometer button until trip a is displayed. After You do all that turn the 4Runner completely off. Press the odometer button and while doing so turn the car to on or accessory mode. Keep pressing the odometer button until the driver information center displays either 000000 or complete. You will need to do this after every time You do an oil change. You should do an oil and filter change in the 4Runner every 3,000-5,000 miles.
Antonio G.
April 9, 2020
To reset the maintenance light on a 2018 toyota 4runner, turn the car to accessory mode. Once you're in accessory mode, use the odometer button to go to trip a. Once trip a is selected, turn the vehicle off and hold down the odometer button while you turn the car to accessory mode. This will reset the maintenance data. Once the screen clears you can turn the vehicle off.
Orlando K.
April 9, 2020
You will start by turning the ignition off and pressing and holding the trip odometer reset button. Now you will turn the ignition to the on position. You must continue to hold down the trip odometer reset button until the display reads 00000 miles and the maintenance light has turned off.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.