Resetting the ECU on a 2007 Toyota RAV4 is a fairly simple task. It should only take about 4 to 9 minutes of Your time. The first thing You will need to do is go to the driver's side of Your car, and get inside. Next, place Your key in the ignition, and turn it to the on position. Make sure when You do this that You don't start the engine. Now, use Your right foot to press the gas pedal completely to the floorboard. Hold it for a count of about 3 seconds, then release. Turn Your ignition back into the off position, then fully give the engine a crank. The ecu should be reset.
Willie M
July 16, 2020
To reset the 2007 toyota rav4 ecu you will follow these steps 1. Confirm that the accelerator pedal is fully released, turn on the ignition switch and wait 3 seconds. 2. Repeat the following steps (2a and 2b) five times within 5 seconds. 2A. 2A. The accelerator pedal (hard) is completely depressed. 2B. 2B. Release the accelerator pedal completely. 3. Wait 7 seconds, depress the accelerator pedal until it blinks. 4. Release the accelerator pedal completely (while the cel still blinks) 5. Depress the accelerator pedal completely and hold it 6. Release the accelerator pedal completely 7. Turn the ignition switch to the "off" position and you can start the car now.
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com
does not research or authenticate any of the Answers provided.